processing conditionsの例文

• Therefore, two polymers with the same MFI will not behave the same under any given processing conditions.
• Initial combustion temperatures run 1500 2000 癈, depending on the processing conditions, generating nanopowder " soot ".
• While this can be done with ethanol, the high temperatures and pressures lead to dangerous processing conditions.
• They provide for integration of polymer and wood flour ( powder ) while facilitating optimal processing conditions.
• Similar surface modification can be achieved in vacuum using the same type of laser and laser processing conditions.
• Degree of acetylation ( DA ) for soluble chitosan ranges from 0 % to 60 %, depending on processing conditions.
• Laser pulse shapes are customizable to circular, elliptical, square, and other profiles to provide the most convenient and efficient processing conditions.
• Safe Foods invested $ 7 million to test Cecure under poultry processing conditions and usher it through the FDA approval process.
• Sterilization of the BIs under worst-case processing conditions confirms that the humidification of the load is adequate to achieve the intended SAL.
• The materials which are being deposited are the major determining factor in the actual processing conditions and equipment which may be used.
• The orientation of crystallites can be random with no preferred direction, called random texture, or directed, possibly due to growth and processing conditions.
• During direct scale-up, all processing conditions must be maintained, while the power rating of the equipment is increased in order to enable the operation of a larger ultrasonic horn.
• This copolymer, upon proper thermal and processing conditions, can form cylinders on the order of a few tens of nanometers in diameter of PMMA, surrounded by a PS matrix.
• Fiber diameters were directly proportional to the initial polymer concentration used for electrospinning; the average diameter of aligned fibers was smaller than that of random fibers under identical processing conditions.
• OPV uses " only abundant elements coupled to an extremely low embodied energy through very low processing temperatures using only ambient processing conditions on simple printing equipment enabling energy pay-back times ".
• The collated SN curves cover a range of material processing conditions and density levels and a range of fatigue testing conditions ( fatigue loading mode, mean stress level and notch factor ).
• The choices available for the isocyanates and polyols, in addition to other additives and processing conditions allow polyurethanes to have the very wide range of properties that make them such widely used polymers.
• Their antimicrobial spectrum of inhibition, bactericidal mode of action, relative tolerance to processing conditions ( pH, NaCl, heat treatments ) and the lack of toxicity towards eukaryotic cells enforces their role as biopreservatives in food.
• Many laboratories have experimented with different methods for condensing buckyball molecules from hot carbon vapor, and scientists have found that small variations in processing conditions produce hollow, roughly spherical molecules of varying shapes and sizes.